China Sinotruk HOWO 4X2 4X4 4WD off Road Sewer Vacuum Suction Tanker Truck 8000L 8m3 8cbm Septic Truck agri supply pto shaft

Product Description

Sinotruk CZPT 4×2 4×4 4wd off Street Sewer Vacuum Suction Tanker Truck 8000L 8m3 8CBM Septic Truck   

Description:

one. Chassis of Sewer cleaning truck:Xihu (West Lake) Dis.feng,FAW,Sinotruk Howo,ISUZU,FOTON,SHACMAN,JMC,JAC,CAMC
2. Push variety of Sewer cleaning truck: 4×2, 4×4, 6×4, 8×4 and so on.
three. Tanker human body of Sewer cleaning truck:From 2cbm to 25 cbm capacity.
3. Accessory of Sewer cleaning truck: Geared up with PTO, transmission shaft, vacuum suction sewage pump, higher strain molding tank, moisture separator, gasoline-oil separation, multiple directional management valve, hanger rod, self-discharging valve, suck fecal gun and pipe network program.

Reference Images of Vacuum Septic Truck

Problem New situation/Remaining hand generate/4×4
Chassis Brand Howo 
Curb fat(kg) 16000kg
Wheelbase(mm) 4600 mm
Dimensions(mm) 8800*2500*3200 mm
Front/Rear Axle loading(kg) 6000/10000 kg
Wheel track (entrance/rear) (mm) 1503/1494 mm
Front/Rear overhang(mm) 1185/1285mm
Approach/Departure angle(°) twenty/fourteen
Max. driving velocity(km/h) 95 km/h
Clutch Bolstered diaphragm clutch
Brakes Air brake
Steering Gear Electricity steering, hydraulic steering with electrical power support
Tire Amount six pcs with 1 spare tire
Specifications fourteen.00R20,radial tire,tremendous wearable 
Transmission Manual sort, 6 Forwards and 1 reverse
Taxi It can accommodate 3 people. With Air Conditioner

 

Engine

Brand Weichai engine
Fuel type Diesel
Horsepower(HP) 266hp
Emission common Euro III
Sewage Suction & Cleaning System
Sewage tank Capacity(cbm/liters) 8cbm/8000 liters/2100 gallons/10cbm/10000liters 
Tank content Q235 carbon steel
Vacuum pump China popular brand name/Italy brand,strong vacuum pump,vacuum rate ninety six%,suction speed:
45L/s,suction lift:6m,reduced RPM,minimal nioise,higher performance and high vacuum
Inlet and Outlet pipe 6m/7m/9m/15m
Principal areas

1. Water-gasoline separator

two. Oil-fuel separator

3. 4 way valve

Remarks

one.The coloration is optional
two.Rear doorway can be hydrualic opened for discharging totally of solid 
stuff.
three.Tank substance can be carbon metal or stainless metal

Reference pictures of 4×2 sewer suction truck 

 

Items Catalog:

1. LPG Tank Truck Trailer/ Gas Tanker Truck/ LPG station
two. Water truck / H2o Tank Truck / Water Sprinkler Truck/Drinking water Tanker
three. Truck with crane / Truck mounted crane
four. Dump Truck / Tipper Truck/Aspect Tipper/End Tipper
five. Fire Fighting Truck / Fireplace Truck / Fire Car
six. Concrete Mixer Truck
7. Van truck /Refrigerated truck
eight. Fecal suction truck / Sewage suction truck, 
nine. Cement Powder Tank truck/ Bulk cement truck
10. High-altitude operation truck, 
eleven. Self-loading garbage truck, garbage compactor truck, sealed rubbish truc
12. Tractor
13. High Pressure Cleansing Truck
14. Sweeper Truck
fifteen. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low mattress trailer / van container trailer / warehouse trailer, and many others. )

US $18,660-41,150
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO9000, CCC, TS16949, CE
Emission Standard: Euro 3
Payload: 10t-15t
Transmission Type: Manual
Fuel: Diesel
Tank Volume: 8000L~1000L

###

Customization:

###

Condition New condition/Left hand drive/4×4
Chassis Brand Howo 
Curb weight(kg) 16000kg
Wheelbase(mm) 4600 mm
Dimensions(mm) 8800*2500*3200 mm
Front/Rear Axle loading(kg) 6000/10000 kg
Wheel track (front/rear) (mm) 1503/1494 mm
Front/Rear overhang(mm) 1185/1285mm
Approach/Departure angle(°) 20/14
Max. driving speed(km/h) 95 km/h
Clutch Reinforced diaphragm clutch
Brakes Air brake
Steering Gear Power steering, hydraulic steering with power assistance
Tire Quantity 6 pcs with one spare tire
Specifications 14.00R20,radial tire,super wearable 
Transmission Manual type, 6 Forwards and 1 reverse
Cab It can accommodate three people. With Air Conditioner

 

Engine

Brand Weichai engine
Fuel type Diesel
Horsepower(HP) 266hp
Emission standard Euro III
Sewage Suction & Cleaning System
Sewage tank Capacity(cbm/liters) 8cbm/8000 liters/2100 gallons/10cbm/10000liters 
Tank material Q235 carbon steel
Vacuum pump China famous brand/Italy brand,powerful vacuum pump,vacuum rate 96%,suction speed:
45L/s,suction lift:6m,low RPM,low nioise,high efficiency and high vacuum
Inlet and Outlet pipe 6m/7m/9m/15m
Main parts

1. Water-gas separator

2. Oil-gas separator

3. Four way valve

Remarks

1.The color is optional;
2.Rear door can be hydrualic opened for discharging completely of solid 
stuff.
3.Tank material can be carbon steel or stainless steel

US $18,660-41,150
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO9000, CCC, TS16949, CE
Emission Standard: Euro 3
Payload: 10t-15t
Transmission Type: Manual
Fuel: Diesel
Tank Volume: 8000L~1000L

###

Customization:

###

Condition New condition/Left hand drive/4×4
Chassis Brand Howo 
Curb weight(kg) 16000kg
Wheelbase(mm) 4600 mm
Dimensions(mm) 8800*2500*3200 mm
Front/Rear Axle loading(kg) 6000/10000 kg
Wheel track (front/rear) (mm) 1503/1494 mm
Front/Rear overhang(mm) 1185/1285mm
Approach/Departure angle(°) 20/14
Max. driving speed(km/h) 95 km/h
Clutch Reinforced diaphragm clutch
Brakes Air brake
Steering Gear Power steering, hydraulic steering with power assistance
Tire Quantity 6 pcs with one spare tire
Specifications 14.00R20,radial tire,super wearable 
Transmission Manual type, 6 Forwards and 1 reverse
Cab It can accommodate three people. With Air Conditioner

 

Engine

Brand Weichai engine
Fuel type Diesel
Horsepower(HP) 266hp
Emission standard Euro III
Sewage Suction & Cleaning System
Sewage tank Capacity(cbm/liters) 8cbm/8000 liters/2100 gallons/10cbm/10000liters 
Tank material Q235 carbon steel
Vacuum pump China famous brand/Italy brand,powerful vacuum pump,vacuum rate 96%,suction speed:
45L/s,suction lift:6m,low RPM,low nioise,high efficiency and high vacuum
Inlet and Outlet pipe 6m/7m/9m/15m
Main parts

1. Water-gas separator

2. Oil-gas separator

3. Four way valve

Remarks

1.The color is optional;
2.Rear door can be hydrualic opened for discharging completely of solid 
stuff.
3.Tank material can be carbon steel or stainless steel

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Sinotruk HOWO 4X2 4X4 4WD off Road Sewer Vacuum Suction Tanker Truck 8000L 8m3 8cbm Septic Truck     agri supply pto shaftChina Sinotruk HOWO 4X2 4X4 4WD off Road Sewer Vacuum Suction Tanker Truck 8000L 8m3 8cbm Septic Truck     agri supply pto shaft
editor by czh 2023-01-07