Tag Archives: 50hp tractor

China wholesaler High Quality China Tractors Dq504 50HP 4WD Four Wheel Drive Compact Small Farm Tractor Hot Sale in Peru with Best Sales

Product Description

High quality China Tractors DQ504 50HP 4WD Four wheel drive Compact Small Farm Tractor hot sale in Peru

Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity, low fuel consumption and high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly, reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/1000, 760/1000, 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.

10. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.

Tractor Main specificaiton and Technical parameters:

Tractor Model DQ504
Drive type 4×4
Engine
Type of engine Xinchai 4-Cylinder Diesel engine
Capacity of fuel tank(L) 38L
Engine power at rated speed  36.8kw / 50HP
Rated speed (r/min) 2400
Transmission
Clutch dry,dual-stage type
PTO speed  540/1000rpm or 540/760rpm
Gear shift 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three point linkage
Category of 3-point link rear, category II
Lifting force (at point of 610mm)KN 12
Technical parameter
Overall size (L x W x H)mm 3513x1750x2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-20
Rear tire 12.4-28/14.9-24 (optional)
Optional Configurations
ROPS,Canopy(Sunshade),Cabin with Fan/Heater/Air-condition, 2-Group Hydraulic output valve, Front ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.9-24 big rear tire, Swing draw bar.

DQ504 50HP 4WD tractor detail showing:

DQ504 50HP 4WD tractor have Various Optional configurations for choose:

Advance Manufacutring Line:

DQ504 50HP 4WD Tractor packing and Delivery transporting:

High quality Tractor have ISO,CE, PVOC COC, CO, etc certificates:

Perfect after-sale service for both Distributors and Private customers:

Please contact us if you have any demand for our Product  :
Best price will be quoted for you as soon as receive your Requirement !

Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor, Orchard Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Diesel
Customization:
Available

|

Customized Request

Shaft Collar

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China wholesaler High Quality China Tractors Dq504 50HP 4WD Four Wheel Drive Compact Small Farm Tractor Hot Sale in Peru   with Best Sales China wholesaler High Quality China Tractors Dq504 50HP 4WD Four Wheel Drive Compact Small Farm Tractor Hot Sale in Peru   with Best Sales
editor by CX 2023-05-07

China high quality 40HP 45HP 50HP 60HP 70HP 90HP 100HP 120HP 220HP China Tractor for Agricultural Machinery Manufacturer 4WD Big Garden Walking Wheel Tractor with Great quality

Product Description

Product Description

Features:
1.This big tractors is a multi-functional, big horsepower agricultural wheel tractors.
2.It has the characteristics of reliable structure, convenient operation, flexible steering, big traction, easy maintenance etc.
3.This series of tractors is from 110hp to 150hp.
4.It equipped with Weichai, YTO, CZPT diesel engine.
5. The tranmission box  adopt 16F+8R shuttle shifts, front wheel hydraulic steering, mechanical step shift. Brake is adopting doube plates oil bath type disc brake. 
6.Rear positioned independent PTO shaft; it is fixed with split type hydraulic suspension system, rear 3 point linkage, three-way hydraulic output valve, with sealed cabin.
7. Used for tilling rotavating, trailing, spraying, ploughing, harrowng, mower cutting, planting, CZPT husbandry etc. 

GP2204 wheel tractor specification
Item Measure specification
Whole unit Brand / GP
Model / GP2204
Type / 4×4 wheel drive
Usage / Agriculture
Dimension(L×W×H) mm 5400×2370×3270
Wheel base mm 2710
Track base( front/rear) mm 1800 ,1920 ,2020/1720-2300
The smallest clearance mm 490
Min. operational weight g 6410
Gear no. / 16F+16R
Engine Brand / YUCHAI
Type   In-line, direct injection,4-stroke,water cooled
Model / Yuchai YC6J220
Manufacturer / Guangxi Yuchai diesel engine Co.,Ltd
Aspiration way / Turbo
Cylinder no. / 6
Diameter X stroke mm 105*125
Rated power W 162
Rated speed r/min 2200
Cooling type / Water cooled
Fuel tank Capacity L 280
Steering and
brake
Steering gear type / Hydraulic steering
Brake model / wet, disc
Transmission Clutch type / Dry, dual-stage action
Gearbox shifting way / Joggle cover
Walking Tyre size( front/rear) / 18.4-26/20.8-38
Working
device
Suspension model / Rear, three-point linkages
Suspension category / III
Adjusting control / Position control, float control
Hydraulic valve / 3 sets
P.T.O. type / Rear, 6 spline
Diameter of spline mm 35
RPM r/min 760/1000
 
GP2204 wheel tractor specification
Item Measure specification
Whole unit Brand / GP
Model / GP2204
Type / 4×4 wheel drive
Usage / Agriculture
Dimension(L×W×H) mm 5400×2370×3270
Wheel base mm 2710
Track base( front/rear) mm 1800 ,1920 ,2020/1720-2300
The smallest clearance mm 490
Min. operational weight g 6410
Gear no. / 16F+16R
Engine Brand / YUCHAI
Type   In-line, direct injection,4-stroke,water cooled
Model / Yuchai YC6J220
Manufacturer / Guangxi Yuchai diesel engine Co.,Ltd
Aspiration way / Turbo
Cylinder no. / 6
Diameter X stroke mm 105*125
Rated power W 162
Rated speed r/min 2200
Cooling type / Water cooled
Fuel tank Capacity L 280
Steering and
brake
Steering gear type / Hydraulic steering
Brake model / wet, disc
Transmission Clutch type / Dry, dual-stage action
Gearbox shifting way / Joggle cover
Walking Tyre size( front/rear) / 18.4-26/20.8-38
Working
device
Suspension model / Rear, three-point linkages
Suspension category / III
Adjusting control / Position control, float control
Hydraulic valve / 3 sets
P.T.O. type / Rear, 6 spline
Diameter of spline mm 35
RPM r/min 760/1000
 

Screw Shaft Types

If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

Machined screw shafts

Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find one to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.
screwshaft

Ball screw nuts

If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the two ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These two features ensure that the ball and the nut meet at two points. You’ll be amazed by the results of the work of these ball screw nuts.
screwshaft

Threaded shank

Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress two pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as one with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is eight mm in diameter but has a thread pitch of one mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

Round head

A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to one mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
screwshaft

Self-locking mechanism

A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.

in Grande Sao Luis Brazil sales price shop near me near me shop factory supplier Argentina Hot Sale Dq504 50HP 4WD Farm Mini Tractor Small Agricultural Tractor Wheel Farming Tractor manufacturer best Cost Custom Cheap wholesaler

  in Grande Sao Luis Brazil  sales   price   shop   near me   near me shop   factory   supplier Argentina Hot Sale Dq504 50HP 4WD Farm Mini Tractor Small Agricultural Tractor Wheel Farming Tractor manufacturer   best   Cost   Custom   Cheap   wholesaler

Our organization pays particular consideration to customers’ wants, listening to the specific requirements of each and every buyer and guaranteeing whole gratification. EPG is a specialist company and exporter that is involved with the layout, development and creation. The team has taken component in the producing and revising of ISO/TC100 global chain regular many a long time in good results and hosted the 16th ISO/TC100 International annual conference in 2004. Argentina sizzling sale DQ504 50HP 4 wheel drive Farm mini tractor Modest EPTT tractor wheel farming tractor

Tractor Main Characteristics and Benefits:
one.Outfitted well-known model engine displaying EPTd ability, reduced gasoline consumption and large economic effectiveness.
2. Streamlined physical appearance design, beautiful and generous.
3.EPTT Scenario undertake meshed shift and include the EPTT interlock unit tends to make the operation much more effortlessly, trustworthy and simpler.
4. EPTT action clutch with disc EPT, complete steadily and effortless to function.
5. Fully EPT steering method drastically decreased EPTr’s work strength.
6. Damp disc brake unit, reliable brake performance.
seven. Separate EPT of EPT oil, dependable to run.
eight. The lifter with pressure and situation adjustment, with reputable elevate.
nine. Tractor PTO:
PTO in EPTT velocity : 540/one thousand, 760/one thousand, 540/760r/min Optional, For substantial doing work effectiveness.
PTO shaft of six or eight spline Optional, adaptable for agricultural products of all in excess of the entire world.

ten. Complete sequence gentle, ROPS,Sunshade/Cover, Fan/Heater/Air-conditioned cabin are all available, for much more cozy driving atmosphere.

Tractor Principal specificaiton and EPTnical parameters:

Tractor Product DQ504
Travel kind 4×4
Motor
Sort of engine XiHu (West EPT) Dis.nchai 4-Cylinder EPTT engine
Capability of gasoline tank(L) 38L
Engine EPTT at rated speed 36.8kw / 50HP
Rated speed (r/min) 2400
EPTT
EPTT dry,twin-phase kind
PTO pace 540/1000rpm or 540/760rpm
EPT shift 8F 4R/8F 8R/12F 12R (Optional)
EPT system
EPT output valve two-Way (optional)
A few position linkage
Class of 3-stage hyperlink rear, class II
EPT pressure (at stage of 610mm)KN 12
EPTnical parameter
Total dimensions (L x W x H)mm 3513x1750x2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-20
Rear tire 12.four-28/14.9-24 (optional)
Optional Configurations
ROPS,Canopy(Sunshade),Cabin with Admirer/Heater/Air-issue, two-Group EPT output valve, Front ballast, Rear ballast,Air brake, 8F 8R/12F 12R Shuttle EPTshift,Paddy tire, 14.nine-24 large rear tire, EPTg attract bar.

DQ504 50HP Four wheel drive tractor depth exhibiting:

Advance Manufacutring Line:

DQ504 50HP Four wheel drive Tractor EPTT and Shipping transporting:

EPT high quality Tractor have ISO,CE, PVOC COC, CO, and so on certificates:
Best following-sale provider for both Distributors and Private buyers:

Make sure you speak to us if you have any demand for our Merchandise :
EPTT price tag will be quoted for you as quickly as EPT your Prerequisite !

  in Grande Sao Luis Brazil  sales   price   shop   near me   near me shop   factory   supplier Argentina Hot Sale Dq504 50HP 4WD Farm Mini Tractor Small Agricultural Tractor Wheel Farming Tractor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Grande Sao Luis Brazil  sales   price   shop   near me   near me shop   factory   supplier Argentina Hot Sale Dq504 50HP 4WD Farm Mini Tractor Small Agricultural Tractor Wheel Farming Tractor manufacturer   best   Cost   Custom   Cheap   wholesaler

Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory 30HP 1 3/8 pto shaft Compact Tractor Wood Chipper, 50HP Portable Wood Chipper with ce certificate top quality low price

We – EPG Team the largest agricultural gearbox and pto factory in China with 5 distinct branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  near me shop  made in China - replacement parts - PTO shaft manufacturer & factory 30HP   1 3/8 pto shaft Compact Tractor Wooden Chipper, 50HP Portable Wood Chipper with ce certification top quality reduced price tag

1 1/8 square pto shaft Our pto shaft pin close to me manufacturing facility crv push shaft has pto shaft collection acquired allison transmission pto bolts the king kutter tiller pto shaft certificate bent pto shaft of 2014 jeep cherokee push shaft China’s 2000 jeep cherokee drive shaft Farm john deere 1025r pto shaft size Equipment Merchandise Good quality Authentication promulgated by the Farm Equipment Merchandise Top quality Authentication Centre of China. Under the guidance of managerial feeling of “Serving agriculture, scoring a accomplishment via top quality of products and honesty in business”, our items have been dependable by clientele and have acquired a greater share of marketplace.

 

industrial wood chipper shredder Item Description

 

 

The branch crusher grinder is used to cut the wood, log and branches into chips with good crushing functionality and large efficiency. It is convenient, risk-free and trustworthy for customers. Suitable for branch and many kinds of waste wood, these kinds of as wood stick, tree branches, leaves, corn straw, crops stalk, dry or environmentally friendly grass, weeds and many others. is our new detachable wood branch crusher. This wooden department crusher is frequent accent facility employed in large scale wood briquetting or pelletizing manufacturing line for grinding wooden raw materia EPT this kind of as log, tree department, tiwg EPT so on.

The functions of Tree branches chipper                                      

1.Use:This machine for making wood chips.

two.Raw content:tree branches , bamboo, little wood logs, environmentally friendly waste and many others

3.Strength:electric powered or diese

4.Feed size:max wood branches diameter is twenty five cm ,specifically for wood branches with leaves 

Cotton rod shredder

 

Model HY-one hundred sixty HY-365
Department Diameter 10-60mm ten-100mm
Cutter Speed 2800rpm 2800rpm
Engine Electrical power seven.5HP 13HP
Oil Tank three.6L 6.5L
Starting up Manner Electric Starter Electric Starter
Gasoline Sort ninety two# gasoline ninety two# gasoline
Engine Product 170F gasoline engine 190F gasoline engine
Can Chang Motor 4kw seven.5kw
Design YYS204 YYS204
Engine Design 177F 188F
Engine Capacity(cc) 270 389
Output Electrical power(HP) 9/thirteen fifteen
EPT Fuel Tank Capacity 36/6.five 6.five
Oil Capability(L) .6/1.one 1.one
Startup Method Hand commence/Electric start Electrical Begin
Potential(KG/H) 600-800 600-800
Dimension(mm) 1150*800*1050 1330*670*1500
Weight(KG) 850 850

our organization


Our Services

one.Pre-sale providers: enthusiasm, patient

Provide you the suitable program, process movement design and maker products in accordance to your EPT demand.
2.Sale companies: servant

Ship specialists to the job site for guiding the set up and adjustment, training operators and finishing the examine and take jointly with you.
three.Soon after-sale solutions: faithfulness

To establish lengthy term relationship with you, we will regularly spend return pay a visit to to customers.
 

FAQ

1. Q: What is the Quality Guarantee for the items?
A: We supply 1 year high quality warranty for all of our items.

2. Q: How can I choose the most appropriate product?
A: Remember to tell us your detailed capability, application, power and so on, then we will match the most appropriate product for you, or you can choose the specific product in the item guide. If you never know the details of the product, make sure you explain to us the usage, then the most ideal design will be advised for you.

3. Q: What’s your payment way?
A: Usually we take T/T, L/C, Western Union, PayPal or Trade Assurance.

four. Q: What is your supply time?

a. The stock samples can be despatched to you inside of 3-5days by EPT categorical right after acquired.
b. The batch purchase can be shipped to you in about ten-15days soon after purchase confirmation (by air or by sea) .

 ♥Professional team

1,Recognized in 2018, is specialised in study, manufacture and advertising of all sorts of shredder for metal,plastic,rubber, wooden , rubbish and other shredder 

2,The shredder/crusher can be customized ,we have the one /double shaft shredder can be chosen based on the different content procedure

three,Expert product sales group, can offer buyer the service from design and style to customs clearance

  We have 24*7 Production line  to guarantee deliver the machine  in short time

4, Manufacturing facility value will be far more aggressive

♥Turnkey venture provider

one. We will offer all the devices for the full manufacturing in accordance to customer’s specifications. 

two. We will give total support for factory layout and other details to help consumer.

three. We will supply excellent service for machine installation and coaching, until the clients can function the device and make EPT manufacturing.

4. Besides 1 yr high quality assure, we will provide soon after-offer services for all the lifestyle.

five. For extended-expression cooperation, we often offer great top quality, good cost and very good services to customer.

Best  near me shop  made in China - replacement parts - PTO shaft manufacturer & factory 30HP   1 3/8 pto shaft Compact Tractor Wooden Chipper, 50HP Transportable Wooden Chipper with ce certification best quality reduced value

Best wholesaler made in China – replacement parts – PTO shaft manufacturer & factory Europe how to remove john deere pto shaft cover Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price

We – EPG Team the most significant agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory Europe   how to remove john deere pto shaft cover Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price

2002 dodge ram travel shaft Our cat 1 pto shaft items ford 8n pto shaft trapped are axial yeti rear travel shaft offering kubota tractor pto shaft seal nicely charger hellcat driveshaft in k5 blazer entrance generate shaft Chinese bmw e46 drive shaft marketplaces pto clutch shaft and grease pto shaft some merchandise offered in global marketplaces are effectively acquired by Chinese and foreign customers at home and overseas. EPG is specialized in design and style, producer and product sales of agricultural equipment and farm implements, which has an impartial import and export legal rights. Europe sizzling offering DQ504 50HP 4×4 Four wheel drive China Mini Garden Farm compact tractor with CE certificate

Tractor Principal Characteristics and Advantages:
one.Equipped popular brand motor displaying advanced capability, reduced fuel intake and substantial economic effectiveness.
two. Streamlined physical appearance design and style, gorgeous and generous.
3.Transmission Scenario undertake meshed shift and include the gearbox interlock gadget tends to make the procedure far more easily, trustworthy and simpler.
4. Double action clutch with disc spring, perform steadily and simple to operate.
5. Entirely hydraulic steering method significantly diminished driver’s perform power.
6. Damp disc brake system, dependable brake overall performance.
seven. Independent injection of hydraulic oil, trustworthy to operate.
8. The lifter with pressure and situation adjustment, with reliable elevate.
nine. Tractor PTO:
PTO in Double velocity : 540/one thousand, 760/one thousand, 540/760r/min Optional, For high doing work efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.

ten. Full series gentle, ROPS,Sunshade/Cover, Admirer/Heater/Air-conditioned cabin are all accessible, for a lot more comfortable driving surroundings.

Tractor Major specificaiton and Technical parameters:

Tractor Product DQ504
Drive sort 4×4
Engine
Kind of engine Xinchai 4-Cylinder  EPT engine
Capacity of gas tank(L) 38L
Motor electrical power at rated speed  36.8kw / 50HP
Rated speed (r/min) 2400
Transmission
Clutch dry,twin-stage type
PTO speed  540/1000rpm or 540/760rpm
Gear change 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three level linkage
Class of 3-stage website link rear, category II
Lifting force (at level of 610mm)KN twelve
Technical parameter
Overall size (L x W x H)mm 3513x1750x2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Entrance tire eight.3-20
Rear tire 12.4-28/14.9-24 (optional)
Optional Configurations
ROPS,Cover(Sunshade),Cabin with Fan/Heater/Air-situation, 2-Team Hydraulic output valve, Entrance ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.9-24 massive rear tire, Swing attract bar.

DQ504 50HP Four wheel drive tractor detail showing:

DQ504 50HP Four wheel drive tractor have Various Optional configurations for pick:

EPT Manufacutring Line:

DQ504 50HP 4 wheel drive Tractor packing and Supply transporting:

Large top quality Tractor have ISO,CE, PVOC COC, CO, etc certificates:

EPT following-sale services for equally Distributors and Private buyers:

You should contact us if you have any desire for our Product  :
Best cost will be quoted for you as shortly as receive your Need !

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory Europe   how to remove john deere pto shaft cover Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price

Europe China 1000 rpm pto shaft sizes in Lusaka Zambia Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price

We – EPG Team the greatest agricultural gearbox and pto factory in China with 5 different branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Europe  China   1000 rpm pto shaft sizes  in Lusaka Zambia  Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price

Europe hot marketing DQ504 50HP 4×4 Four wheel drive China Mini Garden Farm compact tractor with CE certificate

Tractor Main Characteristics and Rewards:
1.Geared up famous model engine demonstrating sophisticated ability, lower gas use and higher financial efficiency.
2. Streamlined visual appeal style, lovely and generous.
three.Transmission Situation undertake meshed shift and incorporate the gearbox interlock device can make the procedure more effortlessly, reputable and less complicated.
four. Double action clutch with disc spring, perform steadily and easy to run.
5. Entirely hydraulic steering program tremendously decreased driver’s perform energy.
6. Moist disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reputable to function.
eight. The lifter with pressure and placement adjustment, with reliable elevate.
nine. Tractor PTO:
PTO in Double velocity : 540/one thousand, 760/a thousand, 540/760r/min Optional, For high doing work performance.
PTO shaft of 6 or eight spline Optional, adaptable for agricultural tools of all more than the planet.

10. Total sequence light-weight, ROPS,Sunshade/Cover, Supporter/Heater/Air-conditioned cabin are all available, for a lot more comfy driving surroundings.

Tractor Primary specificaiton and Technological parameters:

Tractor Design DQ504
Drive type 4×4
Engine
Variety of motor Xinchai four-Cylinder  EPT engine
Potential of gasoline tank(L) 38L
Motor electricity at rated speed  36.8kw / 50HP
Rated pace (r/min) 2400
Transmission
Clutch dry,dual-phase kind
PTO velocity  540/1000rpm or 540/760rpm
Equipment change 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic method
Hydraulic output valve two-Way (optional)
Three position linkage
Class of three-point website link rear, category II
Lifting force (at stage of 610mm)KN 12
Complex parameter
Overall size (L x W x H)mm 3513x1750x2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Entrance tire eight.3-20
Rear tire 12.four-28/14.nine-24 (optional)
Optional Configurations
ROPS,Cover(Sunshade),Cabin with Enthusiast/Heater/Air-condition, 2-Group Hydraulic output valve, Entrance ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.nine-24 huge rear tire, Swing draw bar.

DQ504 50HP 4wd tractor detail showing:

DQ504 50HP Four wheel drive tractor have Numerous Optional configurations for select:

EPT Manufacutring Line:

DQ504 50HP 4wd Tractor packing and Shipping transporting:

Substantial quality Tractor have ISO,CE, PVOC COC, CO, etc certificates:

EPT following-sale support for both Distributors and Personal buyers:

Please speak to us if you have any demand for our Product  :
Very best cost will be quoted for you as quickly as acquire your Prerequisite !

Europe  China   1000 rpm pto shaft sizes  in Lusaka Zambia  Hot Selling Dq504 50HP 4X4 4WD China Mini Garden Farm Compact Tractor with Ce Certificate with ce certificate top quality low price