Tag Archives: tractor walking

China walking tractor gearbox 70004-4 pto shaft bolt

Error:获取session失败,

drive shaft bearing
China walking tractor gearbox 70004-4     pto shaft boltChina walking tractor gearbox 70004-4     pto shaft bolt
editor by CX 2023-04-27

China high quality 40HP 45HP 50HP 60HP 70HP 90HP 100HP 120HP 220HP China Tractor for Agricultural Machinery Manufacturer 4WD Big Garden Walking Wheel Tractor with Great quality

Product Description

Product Description

Features:
1.This big tractors is a multi-functional, big horsepower agricultural wheel tractors.
2.It has the characteristics of reliable structure, convenient operation, flexible steering, big traction, easy maintenance etc.
3.This series of tractors is from 110hp to 150hp.
4.It equipped with Weichai, YTO, CZPT diesel engine.
5. The tranmission box  adopt 16F+8R shuttle shifts, front wheel hydraulic steering, mechanical step shift. Brake is adopting doube plates oil bath type disc brake. 
6.Rear positioned independent PTO shaft; it is fixed with split type hydraulic suspension system, rear 3 point linkage, three-way hydraulic output valve, with sealed cabin.
7. Used for tilling rotavating, trailing, spraying, ploughing, harrowng, mower cutting, planting, CZPT husbandry etc. 

GP2204 wheel tractor specification
Item Measure specification
Whole unit Brand / GP
Model / GP2204
Type / 4×4 wheel drive
Usage / Agriculture
Dimension(L×W×H) mm 5400×2370×3270
Wheel base mm 2710
Track base( front/rear) mm 1800 ,1920 ,2020/1720-2300
The smallest clearance mm 490
Min. operational weight g 6410
Gear no. / 16F+16R
Engine Brand / YUCHAI
Type   In-line, direct injection,4-stroke,water cooled
Model / Yuchai YC6J220
Manufacturer / Guangxi Yuchai diesel engine Co.,Ltd
Aspiration way / Turbo
Cylinder no. / 6
Diameter X stroke mm 105*125
Rated power W 162
Rated speed r/min 2200
Cooling type / Water cooled
Fuel tank Capacity L 280
Steering and
brake
Steering gear type / Hydraulic steering
Brake model / wet, disc
Transmission Clutch type / Dry, dual-stage action
Gearbox shifting way / Joggle cover
Walking Tyre size( front/rear) / 18.4-26/20.8-38
Working
device
Suspension model / Rear, three-point linkages
Suspension category / III
Adjusting control / Position control, float control
Hydraulic valve / 3 sets
P.T.O. type / Rear, 6 spline
Diameter of spline mm 35
RPM r/min 760/1000
 
GP2204 wheel tractor specification
Item Measure specification
Whole unit Brand / GP
Model / GP2204
Type / 4×4 wheel drive
Usage / Agriculture
Dimension(L×W×H) mm 5400×2370×3270
Wheel base mm 2710
Track base( front/rear) mm 1800 ,1920 ,2020/1720-2300
The smallest clearance mm 490
Min. operational weight g 6410
Gear no. / 16F+16R
Engine Brand / YUCHAI
Type   In-line, direct injection,4-stroke,water cooled
Model / Yuchai YC6J220
Manufacturer / Guangxi Yuchai diesel engine Co.,Ltd
Aspiration way / Turbo
Cylinder no. / 6
Diameter X stroke mm 105*125
Rated power W 162
Rated speed r/min 2200
Cooling type / Water cooled
Fuel tank Capacity L 280
Steering and
brake
Steering gear type / Hydraulic steering
Brake model / wet, disc
Transmission Clutch type / Dry, dual-stage action
Gearbox shifting way / Joggle cover
Walking Tyre size( front/rear) / 18.4-26/20.8-38
Working
device
Suspension model / Rear, three-point linkages
Suspension category / III
Adjusting control / Position control, float control
Hydraulic valve / 3 sets
P.T.O. type / Rear, 6 spline
Diameter of spline mm 35
RPM r/min 760/1000
 

Screw Shaft Types

If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

Machined screw shafts

Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find one to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.
screwshaft

Ball screw nuts

If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the two ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These two features ensure that the ball and the nut meet at two points. You’ll be amazed by the results of the work of these ball screw nuts.
screwshaft

Threaded shank

Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress two pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as one with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is eight mm in diameter but has a thread pitch of one mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

Round head

A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to one mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
screwshaft

Self-locking mechanism

A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.

Best wholesaler made in China – replacement parts – PTO shaft manufacturer & factory Hand central propshaft Walking Tractor Mounted Sweet Potato Harvester Potato Harvester with ce certificate top quality low price

We – EPG Group the largest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory Hand  central propshaft Walking Tractor Mounted Sweet Potato Harvester   Potato Harvester with ce certificate top quality low price

4l60e driveshaft Underneath pto shafts online the generate shaft citra direction pto adapter 1-3/8 x 6 spline x 1 round of pto generate shaft indicating managerial toyota tacoma rear drive shaft sense 2005 toyota tacoma push shaft of pto overrun clutch removal “Serving pto shaft on tractor agriculture, king kutter tiller pto shaft scoring a achievement via quality of goods and honesty in company”, our items have been reliable by consumers and have obtained a bigger share of marketplace. “EPG” brand rotocultivator ploughshares in T.S. whole lines created in our manufacturing unit have been tested and appraised by the Ministry of Agriculture and have acquired the license of popularizing farm machinery promulgated by the Ministry of Agriculture of the People’s Republic of China. Hand Strolling tractor mounted sweet potato harvester / potato harvester 
Rewards:
1.This sequence potato harvester not only employed for potato and also for sweet potato, garlic, onion and other root crops.
two.4U Series Potato Harvester has the merits of high efficiency, lower breakage, running fast without trembling, 
and no blocking by the grasses
3.With ISO certificate and international technology. 
four.2 years assure.

 Description:
4U sequence potato harvester is 3 pointed mounted with the tractor, dirve by rear pto shaft. This tractor potato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on field area for their even more selecting up. A triangular beater is set on the potato harvester.
The working theory of this potato harvester is that the digging shovel digs up the soil and crops by way of the impetus of the tractor. And the digging shovel make crop and soil individual although vibration sieve, the soil 1st drip down from the clearance of vibration sieve, lastly the crop crashed down on to the road from the back again.

Device depth:
one.This potato harvester equipment for twenty five-80hp 4 wheel tractor.
two.Dig the potatoes securely without slicing solitary potato or damaging potato skin.
three.Not to affect the subsequent crop’s expansion.
4.Pushed by PTO in rotating velocity 540 r/min.

Main Specifications:

Type 4UD-one 4U-1 4U-2
All round proportions (L×W×H) (cm) 240×90×100 240×100×100 280×220×100
Fat(kg) a hundred and eighty 220 600
Rows 1 one 2
Room of rows 55-80
Productivity(ha/h) .2-.33 .2-1.33 .33-.fifty four
Doing work depth (cm) 20-35
Doing work width (mm) 600 850 1650
Netrate of harvesting 97%
PTO pace (RPM) 540/760
Linkage  three-point mounted
Matched Tractor Electricity(hp) twelve-35 15-35 50-80

FAQ:
one.Following-sales: usually, this type of equipment sel EPT takes place issues. But, if there is any defeacts, just contact with us, we will try our very best to fix your troubles and give a hand for resolving your troubles.
2. Totally free elements: free of charge spare components is obtainable for our buyers. If you have other EPT specifications for the components of equipment, we can supply you that.
three. Terms of payment: TT, Western Union, L/C or other techniques of payment.
four. Shipping: five-8days soon after obtaining payment.
5. Warrantee itme: 24 months.
six. Shipping and delivery: by sea, by road or other ways which consumer favor.
Welcome to make contact with us!
 

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory Hand  central propshaft Walking Tractor Mounted Sweet Potato Harvester   Potato Harvester with ce certificate top quality low price