Merchandise Description

Diesel Soil Planning Machinery 3 Stage Potato Rotary Tiller with CE 

one. The frame is created of thickened metal plate, which is sturdy and resilient, properly decreasing the vibration produced by the motor and prolonging the life of the device
2. The engine adopts a four-cylinder 490 Changchai motor, which is complete of electricity and lower fuel usage
three. The specific gearbox for crawler is shaped in 1 piece, and the rear power output and the walking box are in the exact same gearbox, so that the walking and the rear energy output are much more coordinated.
tune. The unilateral energy cut-off steering can switch 360° on the location, producing the turning and steering a lot more versatile. There are dual brake techniques to make the braking result
Much better fruit. There are 4 ahead gears and 1 reverse equipment, respectively with higher and lower gears, a complete of ten gears. Rear power output details are higher and minimal
Gear, 720 rpm at higher speed and 540 rpm at low speed.
4. There are powerful strain cylinders at the entrance and again, which can comprehend powerful lifting and strong falling, and the operation is much more steady
5. The unique crawler for paddy fields is adopted, which has a big adhesion spot, strong gripping ability, no slippage, no idling, and improves perform effectiveness. The crawler is thickened and widened to 35
cm, the complete equipment weighs only 1.5 tons. The light-weight human body, high chassis and broad crawler can really recognize the twin use of h2o and drought, and the vehicle will not get trapped in the mud.
six. The chassis reinforcement price tag is as higher as 37 cm to enhance the passing efficiency of the device
seven. The single aspect adopts the design of putting in 1 driving wheel, 6 supporting wheels, 2 top wheels, and 1 tensioning wheel, and utilizing 6 supporting wheels can successfully
The excess weight of the machine is distributed to each and every wheel, therefore lowering the weight of the wheel and creating the wheel much more sturdy and use-resistant
8. The turning of the machine adopts unilateral hydraulic minimize-off electrical power, which reduces the dress in on the brake (disc and pad) and prolongs the support existence
9. The sheet steel parts of the machine are produced of thickened metal plates previously mentioned T4, which are sturdy and resilient, not effortless to deform, and the paint colour is produced of large-top quality spray powder, which has great adhesion
Massive and weather resistant.
10. The rear-mounted suspension (with suspension) is compatible with all wheeled tractors and agricultural equipment
11. The hydraulic method of this automobile is hydraulic transmission oil, which is resistant to substantial temperature and is equipped with an eighty-mesh filter, which can properly filter iron filings and impurities in the transmission oil. Refill fluid
The pressure oil radiator reduces the temperature of the transmission oil in the course of use to keep away from damage to the gearbox and control failure
12. Set up a drinking water tank radiator to improve the h2o tank capability, which can efficiently lessen the substantial temperature produced by the engine for the duration of use
thirteen. The air filter is a dry filter, which can filter a big quantity of dust and mud. Following each and every function, clear the air filter and blow the dust inside of
14. The diesel tank has a large potential and a prolonged battery lifestyle
fifteen. It is suited for little and medium-sized paddy fields, swamps, muddy fields, biased fields and other harsh environments. It is specifically ideal for small and medium-sized farmers and growers.Launch the labor drive and significantly enhance the operation performance
one. With a 50-horsepower motor, a fifty-horsepower Changchai motor is optional. The patented merchandise of variable speed gearbox, reliable efficiency, there are 4 ahead gears
One gear with substantial and low velocity, 1 reverse equipment with substantial and minimal pace, a total of 8 forward gears, with neutral and reverse. The rear output of the gearbox has 2 gears
Speed, low pace 540 rpm, high pace 720 rpm.
two. The steering of the device adopts hydraulic compelled unilateral brake steering, and the steering approach has its possess minimize-off power, which can successfully protect the gearbox and braking technique and make it
More sturdy. The machine has rear output, suspension and robust elevate, and can be matched with wheeled tractor implements. An optional bulldozer blade can be installed in front of the fuselage.
As well as the loader bucket, it truly realizes a multi-function device, and the agricultural engineering is appropriate.
three. The design of the belt tractor has much better adaptability than the wheeled type, the chassis is low, the balance is good, and the crawler adhesion coefficient is massive, which can efficiently resist tilting and
Downhill slope. The crawler rotary tiller is an all-terrain procedure machine, which has the mobility of turning and steering in place, and has more powerful climbing and off-street efficiency.

   ZheJiang LuGong Equipment Co., Ltd was founded in March 2000 which positioned at the junction of 3 cities(HangZhou, HangZhou and HangZhou)-HangZhou HangZhou industrial trade park and it truly is the backbone enterprise of construction equipment nationwide wide with fixed asset 500million Yuan. It covers a land of two hundred thousand square meters and has 1,100 employees, 88 of whom are engineers and experts.
Our business largely makes loaders, excavators, tippers, tricycles and so forth. Items are mainly sold to in excess of 20 provinces in China and exported to dozens of nations around the world and locations in Africa, Southeast Asia, South The usa and Russia. The high quality and functionality of our small farm-use loaders and building tippers are in major placement of the sector all through the nation and properly obtained by end users. Now, “Lu Gong” brand loaders and tipper have acquired acceptance by sellers and employs all more than China.
We focus on good quality, efficiency and consider of end users as always. In administration, we’ve achieved a new degree by adopting ISO9001:2015 worldwide quality management technique.
We would like to build in financial design by keeping our previous and new buddies and end users palms by pursuing our company philosophy of “Driven by science and technology, searching for survival by good quality, benefiting by taking care of and successful industry by service” and spirit of “Groundbreaking, innovating and pursuing excellence”.

###

###

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.

editor by czh 2023-01-03